<?php
/* vim: set expandtab tabstop=4 shiftwidth=4 softtabstop=4 foldmethod=marker: */

// {{{ Header

/**
 * Class to convert date strings between Gregorian and Human calendar formats
 *
 * The Human Calendar format has been proposed by Scott Flansburg and can be
 * explained as follows:
 *  The year is made up of 13 months
 *  Each month has 28 days
 *  Counting of months starts from 0 (zero) so the months will run from 0 to 12
 *  New Years day (00) is a monthless day
 *  Note: Leap Years are not yet accounted for in the Human Calendar system
 *
 * PHP versions 4 and 5
 *
 * LICENSE:
 *
 * Copyright (c) 1997-2006 Allan Kent
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted under the terms of the BSD License.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * @category   Date and Time
 * @package    Date
 * @author     Allan Kent <allan@lodestone.co.za>
 * @copyright  1997-2006 Allan Kent
 * @license    http://www.opensource.org/licenses/bsd-license.php
 *             BSD License
 * @version    CVS: $Id: Human.php 733 2010-04-08 12:49:19Z gerd $
 * @link       http://pear.php.net/package/Date
 * @since      File available since Release 1.3
 */

// }}}
// {{{ Class: Date_Human

/**
 * Class to convert date strings between Gregorian and Human calendar formats
 *
 * The Human Calendar format has been proposed by Scott Flansburg and can be
 * explained as follows:
 *  The year is made up of 13 months
 *  Each month has 28 days
 *  Counting of months starts from 0 (zero) so the months will run from 0 to 12
 *  New Years day (00) is a monthless day
 *  Note: Leap Years are not yet accounted for in the Human Calendar system
 *
 * @author     Allan Kent <allan@lodestone.co.za>
 * @copyright  1997-2005 Allan Kent
 * @license    http://www.opensource.org/licenses/bsd-license.php
 *             BSD License
 * @version    Release: 1.4.7
 * @link       http://pear.php.net/package/Date
 * @since      Class available since Release 1.3
 */
class Date_Human
{
    // {{{ gregorianToHuman()

    /**
     * Returns an associative array containing the converted date information
     * in 'Human Calendar' format.
     *
     * @param int day in DD format, default current local day
     * @param int month in MM format, default current local month
     * @param int year in CCYY format, default to current local year
     *
     * @access public
     *
     * @return associative array(
     *               hdom,       // Human Day Of Month, starting at 1
     *               hdow,       // Human Day Of Week, starting at 1
     *               hwom,       // Human Week of Month, starting at 1
     *               hwoy,       // Human Week of Year, starting at 1
     *               hmoy,       // Human Month of Year, starting at 0
     *               )
     *
     * If the day is New Years Day, the function will return
     * "hdom" =>  0
     * "hdow" =>  0
     * "hwom" =>  0
     * "hwoy" =>  0
     * "hmoy" => -1
     *  Since 0 is a valid month number under the Human Calendar, I have left
     *  the month as -1 for New Years Day.
     */
    function gregorianToHuman($day=0, $month=0, $year=0)
    {
        /*
         * Check to see if any of the arguments are empty
         * If they are then populate the $dateinfo array
         * Then check to see which arguments are empty and fill
         * those with the current date info
         */
        if ((empty($day) || (empty($month)) || empty($year))) {
            $dateinfo = getdate(time());
        }
        if (empty($day)) {
            $day = $dateinfo["mday"];
        }
        if (empty($month)) {
            $month = $dateinfo["mon"];
        }
        if (empty($year)) {
            $year = $dateinfo["year"];
        }
        /*
         * We need to know how many days into the year we are
         */
        $dateinfo = getdate(mktime(0, 0, 0, $month, $day, $year));
        $dayofyear = $dateinfo["yday"];
        /*
         * Human Calendar starts at 0 for months and the first day of the year
         * is designated 00, so we need to start our day of the year at 0 for
         * these calculations.
         * Also, the day of the month is calculated with a modulus of 28.
         * Because a day is 28 days, the last day of the month would have a
         * remainder of 0 and not 28 as it should be.  Decrementing $dayofyear
         * gets around this.
         */
        $dayofyear--;
        /*
         * 28 days in a month...
         */
        $humanMonthOfYear = floor($dayofyear / 28);
        /*
         * If we are in the first month then the day of the month is $dayofyear
         * else we need to find the modulus of 28.
         */
        if ($humanMonthOfYear == 0) {
            $humanDayOfMonth = $dayofyear;
        } else {
            $humanDayOfMonth = ($dayofyear) % 28;
        }
        /*
         * Day of the week is modulus 7
         */
        $humanDayOfWeek = $dayofyear % 7;
        /*
         * We can now increment $dayofyear back to it's correct value for
         * the remainder of the calculations
         */
        $dayofyear++;
        /*
         * $humanDayOfMonth needs to be incremented now - recall that we fudged
         * it a bit by decrementing $dayofyear earlier
         * Same goes for $humanDayOfWeek
         */
        $humanDayOfMonth++;
        $humanDayOfWeek++;
        /*
         * Week of the month is day of the month divided by 7, rounded up
         * Same for week of the year, but use $dayofyear instead $humanDayOfMonth
         */
        $humanWeekOfMonth = ceil($humanDayOfMonth / 7);
        $humanWeekOfYear = ceil($dayofyear / 7);
        /*
         * Return an associative array of the values
         */
        return array(
                     "hdom" => $humanDayOfMonth,
                     "hdow" => $humanDayOfWeek,
                     "hwom" => $humanWeekOfMonth,
                     "hwoy" => $humanWeekOfYear,
                     "hmoy" => $humanMonthOfYear );
    }

    // }}}
    // {{{ humanToGregorian()

    /**
     * Returns unix timestamp for a given Human Calendar date
     *
     * @param int day in DD format
     * @param int month in MM format
     * @param int year in CCYY format, default to current local year
     *
     * @access public
     *
     * @return int unix timestamp of date
     */
    function humanToGregorian($day, $month, $year=0)
    {
        /*
         * Check to see if the year has been passed through.
         * If not get current year
         */
        if (empty($year)) {
            $dateinfo = getdate(time());
            $year = $dateinfo["year"];
        }
        /*
         * We need to get the day of the year that we are currently at so that
         * we can work out the Gregorian Month and day
         */
        $DayOfYear = $month * 28;
        $DayOfYear += $day;
        /*
         * Human Calendar starts at 0, so we need to increment $DayOfYear
         * to take into account the day 00
         */
        $DayOfYear++;
        /*
         * the mktime() function will correctly calculate the date for out of
         * range values, so putting $DayOfYear instead of the day of the month
         * will work fine.
         */
        $GregorianTimeStamp = mktime(0, 0, 0, 1, $DayOfYear, $year);
        return $GregorianTimeStamp;
    }

    // }}}
}

// }}}

/*
 * Local variables:
 * mode: php
 * tab-width: 4
 * c-basic-offset: 4
 * c-hanging-comment-ender-p: nil
 * End:
 */
?>